Our work

Case studies

Real jobs, from the problem we were handed to the part or system we delivered.

All case studies

White 3D-printed driver head with a short hex pin sticking out at a right angle from a brass bushing, held together with four screws and nuts

Product design

A right-angle driver for screws a normal driver can't reach

A long, slim driver with a 90-degree 7/64" hex pin, designed, prototyped and made in batches for a manufacturing client.

Read the case study →
Two white 3D-printed room signs with raised navy lettering reading Customer Service and Research Lab, a red line under each name; logos blurred

Signage

Matching room signs for an engineering office

A set of multi-colour 3D-printed room signs for a GTA engineering company, with raised lettering in the company's logo colour.

Read the case study →
Matte black printed battery door on a desk beside the original purple Honda V45 Magna side cover

Part replication

Honda V45 Magna battery door, scanned and re-made

A replacement battery door for a 1982–84 Honda V45 Magna, scanned from an original, reinforced in CAD and printed in 2 days.

Read the case study →

Jigs & fixtures

Production soldering jigs

Custom fixtures that hold flex assemblies for soldering, each engraved with a part number and revision.

Read the case study →
Yamaha WaveRunner gauge cluster fitted into a new black printed bezel

Part replication

Yamaha WaveRunner gauge bezel, replicated

A worn gauge bezel from a Yamaha WaveRunner, 3D scanned and printed as a new part that holds the original gauge cluster.

Read the case study →
Grey RC model warship on a wooden stand, fitted with a new printed superstructure and funnel

Part replication

New decks for an RC battleship model

Worn decks and deck houses on a large radio-controlled model warship, 3D scanned, remodelled in CAD and replaced with new printed parts.

Read the case study →
Honda Civic interior with new white centre console trim fitted around the shifter

Part replication

Honda Civic console trim, re-made in white

Factory black centre console trim from a 10th-generation Honda Civic, 3D scanned and printed in white for a custom interior.

Read the case study →
White winglet fitted behind the rear wheel of a white Honda Civic with bronze five-spoke wheels

Custom parts

Honda Civic Si rear winglets, designed on a 3D scan

Custom winglets behind the rear wheels of a 10th-generation Honda Civic Si, modelled on a 3D scan of the car and printed in white.

Read the case study →
Red 3D-printed spoiler sitting along the trunk lid of a white Honda Civic sedan

Custom parts

Honda Civic trunk spoiler, designed on a 3D scan

A one-off trunk spoiler for a 10th-generation Honda Civic sedan, modelled on a 3D scan of the trunk, printed in sections and joined.

Read the case study →
Grey full-size printed fender flare standing against a tree trunk on grass

Part replication

Cadillac ATS fender flares, printed in sections

Damaged bolt-on fender flares from a Cadillac ATS, 3D scanned and reproduced as full-size prints joined from several sections.

Read the case study →
Black printed trim cover fitted under the side mirror of a white Toyota Sienna

Reverse engineering

Toyota Sienna mirror trim cover, reverse-engineered

A missing trim cover under the side mirror of a 2011 Toyota Sienna, 3D scanned on the van and printed to fit.

Read the case study →

Part replication

Wheel centre caps, replicated

Replacement wheel centre caps matched to an original, including the embossed logo and mounting features.

Read the case study →

Robotics

Autonomous mobile robot platform

An in-house AMR with chassis, electronics and autonomy software designed and built by our team.

Read the case study →

Looking for more? Browse the project gallery.

Have a similar problem?

Tell us about it. An engineer will reply with how we’d approach it.

Start a project